+420 465 461 581 firstname.lastname@example.org
We produce several rotary positioners with the carrying capacity from 50 kg, with a continuous regulation of rotations (controlled by the frequency changers), or without regulation, with manual tilting or tilting by motor, with foot or manual control. The positioners are constructed as robust and do not require any special maintenance during their operation. Standardly the positioners mentioned in the table below can be delivered. We can deliver or adjust them accordingly to the customers needs, on demand, for instance faceplate with different diameter, with openings, threads, T-grooves, different range of rotation speed, etc.
|Type||Diameter of the table (mm)||Carrying capacity /kg/||Position of the table||Range of rotation||Central opening|
|PO 200 S||220||25||Tilting manually||0,14-2,0||Small|
|PO 300 SN||300||100||Tilting manually||0,14-2,0||Small|
|PO 300 D||300||100||Tilting manually||0,34-5,1||Ø55|
|PO 500 S||600||500||Tilting by motor||0,14-2,0||Small|
|PO 500 D||600||500||Tilting by motor||0,14-2,0||Ø140|
|PO 1000 S||1000||1000||Tilting by motor||0,14-2,0||Small|
|PO 2000 S||800||2000||Hydraulic tilting||0,14-2,0||Small|
|PO 2500 SH||1050||2600||Hydraulic tilting and lifting||0,14-2,0||Ø250|
The production line contains lots of variations – accordingly to the customer’s demand, with different surfaces of rollers in regard to the operation conditions such as temperature, environment, carrying capacity, etc. Further we offer variations with adjustable height, modification with one drive roller or with two rollers coupled together etc., with choice of rebuilding the rollers manually or by motor. Carrying capacities in range from 500 kg to 15 tons.
Into this category we place for instance different holders, “pendulating” units, supporters, linear wiring, welding products.
TORCH HOLDERS: they serve for stable configuration at circumferential or face welding. They can be set either in horizontal or vertical level, with or without an arrestment.
PENDULATING UNITS: They are delivered in rotary or linear setting. From the controlling panel the width, frequency of swing, delays in dead centers/separately adjustable right and left side can be set. Further used combinations can be saved and then recaptured from the memory unit.
LINEAR WIRING: it is used for longitudinal welding. In standard, it is delivered in length until 5000 mm. It is equipped with a control system with continuous regulation of movement and the option of tack-welding according to the selected programme.
Positioners of the PO 100 series serve for rotation of long weldments in a horizontal position. Clamping jigs are mounted onto the table tops in accordance with the requirements of customers.
Positioner PO 200 S for welding of smaller parts.
Positioner PO 300 S for welding of smaller parts.
Positioner PO 500 H
Positioner PO 1000 S
The holder serves for a stable adjustment of the torch during circumferential or facial welds.